Having a tanning bed at home is a dream for some individuals. You may tan at any time of day or night if you have a tanning bed in your house. You won’t have to hustle to get to the salon before it closes or drive across town. It’s worth the money, even though they’re pricey, if you routinely use a tanning bed.
Tanning Beds: Three Things to Look for
The Bed’s Design
A regular horizontal bed or a standing booth are your two main options for the design of your bed. Consider a standing booth instead of a horizontal bed if your space is limited. These take up less room and can be tucked away in a corner of your home. Ultimately, this decision comes down to personal preference and the amount of room you have available.
The Light Bulbs in the Mattress
One of the most critical aspects of a tanning bed is the sort of bulbs that are employed. UVA and UVB rays can be used, or simply UVA rays can be used. Which bulbs are best for your skin is a hot topic of debate. No matter what kind of bulbs you use to get a sun-kissed tan, you need to take measures to avoid skin injury.
Replacement bulbs for your bed require you to know exactly what sort of bulbs you have in your bed. You must get the correct bulbs because they are not interchangeable. Also, pay attention to where the lights are located. Will it be easy for me to replace them? Considering that you’ll probably be doing this on your own, you’ll want to make sure it’s as simple as possible.
A facial tanner and a cooling system are two of the best optional extras to search for. The best way to achieve an all-over tan is with a face tanner. It’s tough for some people to get a tan in this location because of the placement of the bulbs.
If you’re prone to overheating in bed, a cooling system is essential. The fan will keep your skin from overheating. When using this feature at night, be careful not to overdo it. Despite the fact that you may not feel the heat, you are still tanning. Overexposure to the sun’s rays might harm your skin if you spend too much time in bed.
Tanning Beds for the Home
Traditional tan beds are the norm in most private homes. Fluorescent-tube-like bulbs are used in these fixtures. This type of bed is called a High Pressure Bed. Instead of the typical lamps, these make use of high-pressure quartz bulbs. Due to the higher gas pressure in the bulb, they are referred to as high pressure bulbs.
You can only tan one side of these beds at a time. Halfway through the session, you’ll have to change positions. These beds are preferred by many over conventional ones because of their added comfort. If you’re looking for used equipment, you may stumble across one of them.
Buying Recycled Sunbeds
A used bed can be a more cost-effective alternative than purchasing a new one for your home. There are many times when you can get a high-quality bed for a low price. It is important to think about these items when you buy a new bed
If you’re thinking about buying a bed, make certain it fulfils all applicable federal and state safety standards. You need to make sure the bed you buy is safe because these things change frequently. There is a wealth of information about regulations for tanning salons from salon owners. In addition, several states have their own rules on the internet for salon businesses.
Investigate the frequency with which the bed was occupied. If it was initially intended for salon use, it’s likely seen a lot of action. Beds purchased for domestic usage are sometimes used sparingly. These can be a terrific option if you’re looking for a used bed at a significant discount.
Compare the cost of a used bed to the cost of a new one. The more significant the discrepancy, the better.
o Find out if any repairs have been made to the vehicle. Also inquire as to when the bulbs were last replaced and how often they have been serviced, as well. You’re looking for a bed that’s been properly cared for.
Ask if the warranty is still valid.